3/4" x 36" Double Head Steel Tent Stakes

Engineered for Maximum Ground Retention & Effortless Extraction

Secure your commercial setups with complete confidence using the 3/4" x 36" Double Head Steel Tent Stake from TentandTable. Forged from heavy-duty steel alloy, these 3-foot stakes deliver exceptional holding power for party tents, event canopies, commercial tarps, bounce houses, inflatable water slides, and temporary structures.

Featuring heat-drawn tips, these stakes penetrate tough ground conditions—including hard-packed dirt and clay—without bending. The double-head design provides a dedicated lower head to keep your ratchet straps and D-rings locked flush against the ground, while the upper head remains exposed for quick, leverage-assisted extraction. Designed for commercial rental operators, these stakes deliver robust Rental Lite performance across diverse turf and ground conditions.

Key Features & Benefits

• Smart Double-Head Profile: Secures tie-down straps and D-rings under the lower flange while leaving the top head clear for fast removal using stake pullers.
• Heat-Drawn Penetrating Tip: Drives easily into dense, compacted soils without compromising structural integrity.
• Commercial-Grade Build: Forged steel alloy construction built to handle frequent setup and teardown cycles.
• Versatile Application: Excellent for securing high-peak frame tents, pole tents, inflatables, temporary fencing, and heavy tarps.

Key Product Details

• Product Type: Heavy-Duty Double Head Steel Tent Stake
• Quantity: Sold Individually (Order the exact quantity needed for your layout)
• Dimensions: 3/4" diameter x 36" length (3 feet long)
• Stakehead Diameter: 1 3/8" to 1 1/2" (may vary slightly by manufacturer)
• Material & Construction: Heat-drawn forged steel alloy with a dual-head profile
• Primary Uses: Party tents, high-peak frame tents, inflatables, commercial tarps, perimeter fencing, and heavy landscaping
• Surface Compatibility: Grass, soil, packed earth, and gravel. (Note: Hard surfaces like asphalt require specialized installation methods, such as pre-drilling pilot holes—standard direct staking into asphalt without prep is not recommended).

What’s Included & Accessories

• Included: (1) 3/4" x 36" Double Head Steel Tent Stake (Sold as individual units, not in packs)
• Sold Separately: Ratchet straps, tie-down ropes, stake extraction tools, and 2" plastic safety stake caps (highly recommended to improve visibility and reduce trip hazards at your venue)
• Important Hard-Surface Guidance: While heat-drawn steel stakes are extremely durable, driving them directly into asphalt or concrete using standard staking methods can damage the surface and ruin the stake. Always pilot-drill holes using appropriate masonry bits and follow proper engineering procedures when anchoring on asphalt or hard paved surfaces.

Frequently Asked Questions (FAQ)

1. What are the advantages of double-headed tent stakes over single-head stakes?

Double-headed stakes make securing and tearing down event setups much easier. Your ratchet strap, rope, or D-ring sits flush against the lower head, keeping the anchor point stable at ground level. The upper head stays exposed above the strap, providing a dedicated hook point for stake extractors or leverage tools during takedown.

2. Can these 36-inch metal stakes be driven into asphalt or rocky ground?

Yes, but proper prep work is required. While the heat-drawn tips handle rocky soil and dense earth well, you must pre-drill pilot holes when anchoring into asphalt or paved surfaces. Standard direct driving into asphalt without pre-drilling is improper and can damage both the asphalt and the stake.

3. Are these stakes sold individually or in a pack?

These stakes are sold individually, allowing you to order the precise quantity required for your specific tent, canopy, or inflatable layout. Check your equipment manufacturer's guidelines to determine the exact number of stakes required per leg or tie-down point.

4. What comes included, and what extra gear do I need?

Each purchase includes one 3/4" x 36" double head steel stake. Additional setup gear—such as ratchet straps, tie-down ropes, and protective 2" plastic safety caps—is sold separately. We strongly advise using bright safety caps over installed stake heads to increase visibility and help prevent tripping hazards.

5. Are these steel tent stakes classified as commercial grade?

Yes. These stakes are built for Rental Lite and commercial applications. They provide significantly greater tensile strength, rigidity, and lifespan compared to standard residential ground spikes, making them an ideal solution for party rental companies and commercial event operators.

6. What warranty and shipping options does TentandTable offer?

TentandTable provides fast shipping options across the country. These 3/4" double head steel stakes are backed by a 1-year limited warranty covering manufacturing defects.

We Recommend: Use our 2" Plastic Stake Caps in conjunction with these steel tent stakes to easily identify stake locations and avoid tripping hazards.

Please Note: The stake head will have a diameter of 1 3/8" to 1 1/2", which will vary by manufacturer