2.0 HP Zoom XLT MAX Blower
The Zoom MAX 2 HP Inflatable Bounce House Blower is the next step in constant air blower engineering, with features that can't be found on any other inflatable blower.
These air blowers are constructed using a rotational (or roto) mold housing that is thicker and more durable, measuring up more effectively against both physical and UV damage than standard blow molding. There is additional material in the high-stress areas, making them more impact-resistant than any other commercial blower on the market, as well as resisting fading and deterioration caused by the sun's rays. The materials used in the construction of our MAX blowers are more easily recyclable than other blowers, use fewer chemicals for the molding process, and are more environmentally friendly.
There are multiple new upgrades that have been added to these premium blowers that are explicitly designed to make everything about them more straightforward and more convenient to use, whether you just need one for a personal bouncer or to run a thriving party rental business.
While the CFM rating may be higher on older models, don't let this dissuade you from trying this unit. Our MAX blowers offer improved static pressure over older XLT models, which means that these blowers are able to keep more air inside the inflatable while using less exertion. This makes for a greener product, but also a smaller electric bill and lower cost of ownership over previous models.
We've listened to your suggestions and the Zoom MAX blower brings a newly designed base that is broader and more stable, preventing tip-overs that can happen from high winds or heavy foot traffic. For even more security, there are also stake holes molded to accept 1/2" diameter hook stakes that can be driven into the ground. This increased stability makes the stacking design on both this and the Zoom XLT blower more viable for storage. Don't worry if you already have XLT blowers either, as the MAX blowers can stack onto all of the XLT blowers as well (up to 4 vertically stacked blowers).
You can add this to your current inventory seamlessly, especially with our careful consideration as to the specifications of the Zoom MAX. Our 2 HP MAX blower is interchangeable with the 2 HP XLT blower, having been tested side by side with our Zoom XLTs, and they keep the low amperage draw that is favored by our commercial customers. This is also compatible with the Zoom Deflator Tube, as the clips are the same as our original XLT blowers of the same horsepower.
The built-in cord wrap lets you store this blower without needing a tie or awkwardly bundling the power cable, and the lighted cord plug has a molded clip to allow you to keep your cord wrap tight. There is also a lighted power switch that's sealed and completely waterproof.
ETL Listed Both US and Canada - One Blower for Both Countries
Zoom XLT MAX Blower Features:
- Roto mold housing uses less chemicals and is more durable than blow molds
- Newly redesigned base that is broader and more secure from tip overs
- Molded stake holes for securing blower to the ground with 1/2" hook stakes.
- Improved static pressure and lower CFM increases efficiency with less exertion, saving money on energy costs
- Lighted weatherproof sealed power switch
- 6" x 6" Chute Size
- Built in cord wrap
- Lighted cord end with molded clip for keeping cord tight
- Stack up to 4 high for storage - XLT and MAX blowers fully stacking compatible with each other
- Zoom Deflator Tube compatible with MAX and XLT blowers
- ETL Listed, certified for both US and Canadian commercial use
|Shipping Method||Parcel (Ground)|
|Horse Power||2 HP|
|CFM (Cubic Feet per Minute)||1013|
|Volts||Standard 115 V|
|Item Dimensions||19" x 15" x 19"|
Orders will be processed and shipped in 1-3 business days. Should your order be time-sensitive please contact a sales representative about priority shipping methods vs standard shipping.